Seismic stability of embankments with different densities and upstream conditions related to the water level

Modeling an embankment by subjecting it to different upstream conditions in a centrifuge is challenging. However, the response of an embankment to shaking under different upstream conditions needs to be studied to ensure that the necessary precautions are taken during its construction and maintenance. Herein, the influence of different upstream conditions and embankment densities are investigated. The pore water pressure values at different locations in an embankment were recorded during seepage and under induced shaking. Accelerometers recorded the response of the embankment to shaking, and a linear variable differential transformer (LVDT) measured the settlement at the top of the embankment as a result of the shaking. An image analysis was used to trace the resulting deformation of the embankment due to the shaking. The results indicate that the upstream conditions of the embankment determine the failure mechanism of the embankment in cases of lower density. In addition, the distribution of the water content within the embankment was found to have a greater influence on its response to shaking than the water level height on its upstream side.     

Learn from the past – sequentially one-to-one video deblurring network

With the growing availability of hand-held cameras in recent years, more and more images and videos are taken at any time and any place. However, they usually suffer from undesirable blur due to camera shake or object motion in the scene. In recent years, a few modern video deblurring methods are proposed and achieve impressive performance. However, they are still not suitable for practical applications as high computational cost or using future information as input. To address the issues, we propose a sequentially one-to-one video deblurring network (SOON) which can deblur effectively without any future information. It transfers both spatial and temporal information to the next frame by utilizing the recurrent architecture. In addition, we design a novel Spatio-Temporal Attention module to nudge the network to focus on the meaningful and essential features in the past. Extensive experiments demonstrate that the proposed method outperforms the state-of-the-art deblurring methods, both quantitatively and qualitatively, on various challenging real-world deblurring datasets. Moreover, as our method deblurs in an online manner and is potentially real-time, it is more suitable for practical applications.     

Various density light field image coding based on distortion minimization interpolation

In recent years, the light field (LF) as a new imaging modality has attracted wide interest. The large data volume of LF images poses great challenge to LF image coding, and the LF images captured by different devices show significant differences in angular domain. In this paper we propose a view prediction framework to handle LF image coding with various sampling density. All LF images are represented as view arrays. We first partition the views into reference view (RV) set and intermediate view (IV) set. The RVs are rearranged into a pseudo sequence and directly compressed by a video encoder. Other views are then predicted by the RVs. To exploit the four dimensional signal structure, we propose the linear approximation prior (LAP) to reveal the correlation among LF views and efficiently remove the LF data redundancy. Based on the LAP, a distortion minimization interpolation (DMI) method is used to predict IVs. To robustly handle the LF images with different sampling density, we propose an Iteratively Updating depth image based rendering (IU-DIBR) method to extend our DMI. Some auxiliary views are generated to cover the target region and then the DMI calculates reconstruction coefficients for the IVs. Different view partition patterns are also explored. Extensive experiments on different types LF images also valid the efficiency of the proposed method.     

An improvement of the Space-Time Image Velocimetry combined with a new denoising method for estimating river discharge

The Space-Time Image Velocimetry (STIV) is a time-averaged velocity measurement method, which takes river surface images as the analysis object, and detects the Main Orientation of Texture (MOT) in a generated Space-Time Image (STI) to obtain one-dimensional velocities on the water surface. The STIV has great potential in real-time monitoring of river flow owing to its high spatial resolution and low time complexity. However, the generated STI contains a lot of noise and interference texture, which is inevitable in practical applications. The practicality of the STIV is severely limited by the low-quality STI. To solve this problem, a denoising method based on the filtering technology is proposed and combined with different texture detection algorithms in this paper. The accuracy of this method is verified through a comparative field experiment with an impellor-style current meter. The experimental results show: (1) By using this new denoising method, the robustness and accuracy of the STIV are significantly improved no matter what kind of texture detection algorithm is adopted; (2) Among all the texture detection algorithms, the FFT-based STIV combined with the new denoising method performs best. The relative errors of the surface velocities are controlled within 6%, and the relative errors of the discharges are controlled within ±4%.     

Low-memory and high-performance architectures for the CCSDS 122.0-B-1 compression standard

Two low-memory and high-performance architectures for the CCSDS 122.0-B-1 standard are proposed. They use novel memory organizations to reduce the total memory requirements in order to be implemented in a single FPGA device. The architectures were implemented in radiation-hardened and commercial FPGA devices. Based on the experimental results for the case of Virtex5QV radiation-hardened device, the throughput is 135 MSamples/sec for image with 12 bits/pixel and horizontal resolution up 8192 pixels. Also, the proposed architectures outperform the existing one in terms of the memory requirements and area.     

A Generalized Cubemap for Encoding 360° VR Videos using Polynomial Approximation

360^° VR videos provide users with an immersive visual experience. To encode 360^° VR videos, spherical pixels must be mapped onto a two‐dimensional domain to take advantage of the existing video encoding and storage standards. In VR industry, standard cubemap projection is the most widely used projection method for encoding 360^° VR videos. However, it exhibits pixel density variation at different regions due to projection distortion. We present a generalized algorithm to improve the efficiency of cubemap projection using polynomial approximation. In our algorithm, standard cubemap projection can be regarded as a special form with 1st‐order polynomial. Our experiments show that the generalized cubemap projection can significantly reduce the projection distortion using higher order polynomials. As a result, pixel distribution can be well balanced in the resulting 360^° VR videos. We use PSNR, S‐PSNR and CPP‐PSNR to evaluate the visual quality and the experimental results demonstrate promising performance improvement against standard cubemap projection and Google's equi‐angular cubemap.     

Succinct Palette and Color Model Generation and Manipulation Using Hierarchical Representation

We propose a new method to obtain the representative colors and their distributions of an image. Our intuition is that it is possible to derive the global model from the local distributions. Beginning by sampling pure colors, we build a hierarchical representation of colors in the image via a bottom‐up approach. From the resulting hierarchy, we can obtain satisfactory palettes/color models automatically without a predefined size. Furthermore, we provide interactive operations to manipulate the results which allow the users to reflect their intention directly. In our experiment, we show that the proposed method produces more succinct results that faithfully represent all the colors in the image with an appropriate number of components. We also show that the proposed interactive approach can improve the results of applications such as recoloring and soft segmentation.     

Chest X-ray enhancement to interpret pneumonia malformation based on fuzzy soft set and Dempster–Shafer theory of evidence

Image enhancement algorithms are commonly used to increase the contrast and visual quality of low-dose x-ray images. This paper proposes an automated enhancement method using soft fuzzy sets with a new decision-making scheme based on Dempster-Shafer theory of evidence for the visual interpretation of pneumonia malformation in low-dose x-ray images, called as XEFSDS. The XEFSDS model first generates an original source x-ray image into a complementary image, then each original and complement image is applied to the characterized image object and background areas of fuzzy space. The S-function is utilized to define fuzzy soft sets for the classification of gray level ambiguity in both images, and hence a decision criterion via Dempster-Shafer approach and fuzzy interval has been adapted to discriminate uncertainties on the pixel intensity and the spatial information. Modified membership grade operations have been performed on each object/background area, and Werner’s AND/OR operator (an aggregation operator) has been utilized to build a new membership function from two modified membership functions. Finally, an enhanced image is obtained from the new membership function via defuzzification. Experiments on different pneumonia X-ray images demonstrate that the XEFSDS scheme produces better results than the existing methods. To show the advantages of the XEFSDS scheme, we have executed a segmentation based examination on enhanced image for the detection of pneumonia malformation as well as abnormal lobe (lobar pneumonia) or bronchopneumonia.     

Image analysis of the porous yttria-stabilized zirconia (YSZ) structure for a lanthanum ferrite-impregnated solid oxide fuel cell (SOFC) electrode

Image analysis and quantification were performed on porous scaffolds for building SOFC cathodes using the two types of YSZ powders. The two powders (U1 and U2) showed different particle size distribution and sinterability at 1300?°C. AC impedance on symmetrical cells was used to evaluate the performance of the electrode impregnated with 35-wt.% La_0.8Sr_0.2FeO₃. For example, at 700?°C, the electrode from U2 powder shows a polarization resistance (R_p) of 0.21?Ω?cm², and series resistance (R_s) of 8.5?Ω?cm² for an YSZ electrolyte of 2-mm thickness, lower than the electrode from U1 powder (0.25?Ω?cm² for R_p and 10?Ω?cm² for R_s) does. The quantitative study on image of the sintered scaffold indicates that U2 powder is better at producing architecture of high porosity or long triple phase boundary (TPB), which is attributed as the reason for the higher performance of the LSF-impregnated electrode.